Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

Specifications:

Body Wood: Mahogany
Neck Wood: Set Mahogany/Rosewood Board
Neck Shape: 63 C
Fretsize: 6150
Radius: 10”
Pickups: RS/Fralin True 60 Bridge and Hum Canceling P-90 Neck
Electronics: RS Superpot Volumes, CTS Audio Tone, Switchcraft Jack and Switch, RS Guitarcap
Bridge: Hipshot
Tuners: Hipshot
Hardware: Aged Nickel
Strings: Ernie Ball .010-.046
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Contour 54 Bass is our twist on what would have happened if the J bass was designed in 1954. This bass uses all classic parts and twists that were in play at that time, but where never put together on one bass till now. Everything about this bass screams classic, but unique. It’s an amazing bass that can do it all and look cool at the same time.

Specifications:

Body Wood: Ash
Neck Wood: One-Piece Maple
Fret Size: 6105
Radius: 10″
Neck Shape: Thin C
Pickups: Custom Lindy Fralin 51P Pickups
Electronics: CTS Concentric Pots, Switchcraft Jack, and RS/Luxe Guitarcap
Bridge: Vintage
Hardware: Aged Nickel
Tuners: Hipshot Featherweight
Strings: Ernie Ball .045-.105
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Contour '59 Bass is our twist on the Motown classic. This bass should be everyone’s go-to bass, because for recording it simply can’t be beat – and there’s no style that it can’t cover.

Specifications:

Body Wood: Alder
Neck Wood: Maple/Rosewood
Fret Size: 6105
Radius: 10″
Neck Shape: Wide C
Pickups: Custom Lindy Fralin Custom P Bass
Electronics: RS Superpot, CTS Audio Tone, Switchcraft Jack & RS/Jensen Cap
Bridge: Vintage
Hardware: Aged Nickel
Tuners: Hipshot Featherweight
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Contour 63 Bass is our twist on the 60’s classic design. Play one with its slim neck, great balance of feel, and tone – and you will see why they are the choice of so many bass players.

Specifications:

Body Wood: Alder
Neck Wood: Maple/Rosewood
Fret Size: 6105
Radius: 10″
Neck Shape: Narrow C
Pickups: Custom Lindy Fralin Staggered J Bass
Electronics: RS Superpot, CTS Audio Tone, Switchcraft Jack & RS/Jensen Cap
Bridge: Vintage
Hardware: Aged Nickel
Tuners: Hipshot Featherweight
Strings: Ernie Ball .045-.100
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Contour Greenguard is our take on the classic design of 1959-1962 with its alder body and rosewood board. We chose the parts we liked from each year and added a flatted radius, larger frets, our own US made tremolo with Raw Vintage saddles and springs for a classic guitar with none of the issues found in the originals. The Greenguard has a warmer tone than it’s Whiteguard Brother making it a great choice from blues and Rock players alike.

Specifications:

Body Wood: Alder
Neck Wood: Maple/Rosewood
Fret Size: 6105
Radius: 10″
Neck Shape: Fat C
Pickups: Custom Lindy Fralin Vintage Set
Electronics: RS Superpot, CTS Audio Tones, CRL Switch, Switchcraft Jack & RS PIO cap
Bridge: RS Custom with Aluminum Block, Raw Vintage Saddles and Springs
Tuners: Klusons
Hardware: Aged Nickel
Strings: Ernie Ball .010-.046
Case: Custom G&G Case

Here is your chance to order one of our Contour series guitars to your exact specifications using any combinations of vintage or modern specs. You get to choose every part of this guitar to best suite your playing style and needs. Make your own classic today!

Price changes due to options that result in an upcharge will be reflected at checkout.

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Contour Whiteguard is our take on the classic design of 1954-1956 with it’s ash body, maple neck. We chose the parts we liked from each year and added a flatted radius, larger frets, our own US made tremolo with Raw Vintage saddles and springs for a classic guitar with none of the issues found in the originals.

Specifications:

Body Wood: Ash
Neck Wood: One-piece Maple
Fret Size: 6105
Radius: 10″
Neck Shape: Soft V
Pickups: Custom Lindy Fralin Vintage 54 Set
Electronics: RS Superpot, CTS Audio Tones, CRL Switch, Switchcraft Jack & RS/Jensen Cap
Bridge: RS Custom with Aluminum Block, Raw Vintage Saddles & Springs
Hardware: Aged Nickel
Tuners: Klusons
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

Specifications:

Color: Lite Burst Based on Wood Color
Body Wood: Burl Maple Top on Hollow Mahogany Body
Neck Wood: One-Piece Maple
Neck Shape: 63 C
Fretsize: 6105 EVO
Radius: 10”
Pickups: Lindy Fralin Johnny Smith Neck and Steel Poled 43 Bridge
Electronics: RS Superpot, CTS Audio Tone, Switchcraft Switch, Switchcraft Jack & RS Modern Guitarcap, Dummy Coil
Bridge: RS Vintage with Aluminum Saddles
Tuners: Klusons
Hardware: Satin Nickel
Strings: Ernie Ball .010-.046
Case: Custom G&G Case

The Old Soul is something special; like the name implies - it’s built to play and sound older than it is. These guitars feel and sound like they have been played for 50 years! The Old Soul is a culmination of observations that come with 24 years of building new guitars and restoring 100s of vintage guitars.

The body is a mix of Northern Ash and old-growth Sugar Pine - finished in a super thin lacquer applied just like Leo did in the day. The Old Soul is topped off with all American-made hardware and pickups designed specifically for these guitars by Lindy Fralin and RS that have a unique wind and use three different magnets!

There are no off-the-shelf parts used on RS guitars and no corners are cut. You simply won’t find a better guitar in this price range. Every RS Guitarworks guitar includes a custom G&G hard case made especially for RS and our lifetime warranty to the original owner!

Specifications:

Body: Northern Ash/Sugar Pine 

Neck: One-Piece Maple

Neck Shape: Old Soul .825” C

Radius: 10” with rolled edge

Frets: Jescar 50085 

Finish: Ultra-thin WWLD lacquer in Shoreline Gold, Copper, Black, Inca Silver, Fiesta Red, Shell Pink or Surf Green

Pickups: Custom RS-designed Fralin Old Soul Specials

Electronics: RS SuperPot volume, CTS custom audio tone, RS Vintage paper-in-oil cap, CRL switch, Switchcraft jack in Electrosocket cup and all cloth Gaven wire

Bridge: RS USA Vintage Cold Rolled Steel with compensated brass Steel saddles

Tuners: Kluson Supreme 18:1

Hardware: Nickel

Case: Custom G&G white with "purple poodle" lining

Warranty: Lifetime

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

Specifications:

Body Wood: Mahogany or Ash
Neck Wood: Maple
Neck Shape: .830″ C
Nut Width: 1.650″
Fretsize: 6105
Radius: 10”
Pickups: Jason Lollar Thunderbird Set
Electronics: CTS Concentric Pots, Switchcraft Jack, and Mallory 150 Caps
Bridge: Vintage 2 Saddle
Tuners: Hipshot Ultralites
Hardware: Aged Nickel
Strings: DR .045-.105
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Rockabilly series is based on a classic body style – with added contours to provide a more comfortable feel in the guitar . From there, we added TV Jones pickups and a custom 60s-inspired back-painted pickguard with clear RS logo to show the body color. With the Rockabilly series, we made a guitar with striking looks – while keeping a very raw, classic tone. RS worked hard to arrive at the perfect wood combination that makes these guitars very special, with a tone all their own.

Specifications:

Body Wood: Ash
Neck Wood: Maple/Rosewood
Fret Size: 6105
Radius: 10″
Neck Shape: Boat
Pickups: TV Jones Powertron Bridge (Optional TV Classic Neck on Sr model)
Electronics: RS Superpot , CTS Audio Tone, CRL Switch, Switchcraft Jack, and RS/Luxe Cap
Bridge: Glendale/RS Half Bridge
Hardware: Aged Nickel
Tuners: Klusons
Case: Custom G&G Brown Alligator
Warranty: Lifetime Warranty

Now is your chance to bid on legendary The Cars guitarist and Rock and Roll Hall of Famer Elliot Easton's one-of-a-kind lefty RS Slab Custom guitar, signed by the artist himself - AND support a great cause!

This left-handed Slab Custom EE was built for Elliot Easton in celebration of RS Guitarworks' 25th Anniversary in 2021. Upon receiving his second RS guitar this year, Elliot graciously donated this guitar to benefit the RS Guitars For Kids Program.

The winning bid will receive a complete package including his Slab Custom EE guitar, along with a G&G hardshell case, autographed photo & CD, guitar picks, as well as all the RS Guitarworks case candy.

100% of the proceeds of this auction will go to the RS Guitars For Kids program, benefitting underserved kids at Christmas - by providing them with a new acoustic or electric guitar so they can realize their dreams and become the next generation of artists.

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Slab 59 is our version of the late 50’s design with a modern twist. We chose what we felt were the best parts of the guitars built from 1959-61 and added a flatter radius, slightly larger frets and compensated saddles. This makes a classic feeling and sounding guitar that is slightly thicker than its Blackguard or Whiteguard brothers, without some of the limitations found in the original.

Specifications:

Body Wood: Ash
Neck Wood: Maple/Rosewood
Neck Shape: 63C
Fret Size: 6105
Radius: 10”
Pickups: Custom Lindy Fralin Staggered Set
Electronics: RS Superpot, CTS Audio Tone, CRL Switch, Switchcraft Jack & RS Paper-In-Oil Guitarcap
Bridge: RS Vintage with Steel Saddles
Tuners: Klusons
Hardware: Aged Nickel
Strings: Ernie Ball .010-.046
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Bakersfield is our version of the early 60’s custom design with a modern twist. We chose what we felt were the best parts of the guitars built from 1959-61 and added a flatter radius, slightly larger frets and compensated saddles. With it’s double bound body and mint green guard these guitars have a classic look that is just stunning! This makes a classic feeling and a sound that’s pure Bakersfield without some of the limitations found in the original.

Body Wood: Alder
Neck Wood: Maple/Rosewood
Neck Shape: 63 C
Fretsize: 6105
Radius: 10”
Pickups: Custom Lindy Fralin Staggered Set
Electronics: RS Superpot, CTS Audio Tone, CRL Switch, Switchcraft Jack & RS Modern Guitarcap
Bridge: RS Vintage with Aluminum Saddles
Tuners: Klusons
Hardware: Aged Nickel
Case: Custom G&G Case

Note: All RS Guitarworks Guitars and Basses may also be ordered in left-handed configuration at no additional charge!

The Slab Bass is our take on the early 50’s classic design. Simple and straight-ahead, but after all these years it’s still timeless. From fat lows and killer growl this bass can cover a lot of ground for a one pickup bass. The Slab Bass TV Model adds the twist of a killer TV Jones pickup to really add thundering lows and a driving midrange.

Specifications:

Body Wood: Ash
Neck Wood: One-piece Maple
Neck Shape: Fat C
Fret Size: 6105
Radius: 10″
Pickups: Custom Lindy Fralin 51P Pickup (Slab TV Model: TV Jones Super Thundertron Pickup)
Electronics: RS Superpot, CTS Audio Tone, Switchcraft Jack & RS/Jensen Cap (Slab TV Model: RS/Luxe Cap)
Bridge: Vintage
Hardware: Aged Nickel
Tuners: Hipshot Featherweight
Case: Custom G&G Case
Strings: Ernie Ball .045-.100